Home Warranty ZL Series Mechanical Seal Warranty

ZL Series Mechanical Seal Warranty

 

It’s All About Reliability

 

ZL™ SERIES CARTRIDGE MECHANICAL SEAL

LIFE VALUE WARRANTY

             • Comprehensive. Covers all standard parts of the mechanical seal.*

            • No questions asked. Just mail  in confirmation card or register on line

            • Seals maintain value throughout their lifetime.

 
 Single Cartridge Seals 50/50 warranty

Any failure during the first fifty (50) days will qualify for a no charge rebuild of the seal.

Beyond 50 days, and any subsequent rebuilds after the first, for the lifetime of the seal, it will be rebuilt at fifty percent (50%) of the then current list price.**

 Double and Triplex Cartridge Seals 65/65 Warranty

Any failure during the first sixty-five (65) days will qualify for a no charge rebuild of the seal.

Beyond sixty-five (65) days, and any subsequent rebuilds after the first, for the lifetime of the seal, it will be rebuilt at sixty-five percent (65%) of the then current price.** 

 

 Procedure to Obtain Life Value Warranty

    1. Application must be reviewed and approved by the Authorized EnviroPump and Seal Distributor.

    2. Distributor must file Warranty/Application Registration with EnviroPump and Seal at time of sale.*(Click here to Register on-line)

    3. End user must mail confirmation card to EnviroPump and Seal or register on-line at time of start up.*(Click here to Register on-line)

    4. Obtain a WRP number from the factory and return the seal freight prepaid.

 All parts are replaced (at the then current list price) FOB factory, Marietta, GA, with either a new or a refurbished part (at the sole discretion of EnviroPump and Seal).  Should a customer elect to replace an unfailed part during repair of the seal, the new unfailed part will be sold at the then current list price.  No warranty is made against corrosion or erosion.

 This Life Value Warranty is offered according to the above conditions and procedures.  This warranty is exclusive and in lieu of all other warranties, either expressed or implied or by trade usage in connection with the design, sale or use of any of its equipment, and EnviroPump and Seal shall in no event be liable for loss, damage, injury or expense resulting from the failure of operation, faulty operation, or breakdown of the equipment supplied hereunder or of any part, nor for special, remote or consequential damages of any nature, nor in any event, for any amount in excess of the cost of the repair to the defective part or a replacement part.

 The forgoing warranty does not cover, and EnviroPump and Seal makes no warranty, with respect to:  (a) failures not reported t EnviroPump and Seal within the warranty period; (b) failure or damage due to chemical action, or wear caused by the presence of abrasive materials; (c) equipment which has been altered, except as authorized by EnviroPump and Seal; (d) equipment which has been damaged in shipment or  otherwise without the fault of EnviroPump and Seal; (e) equipment not originally supplied by EnviroPump and Seal.

 *Custom made components and special elastomers (perfluroelastomers, Kalrez™, Chemraz™, etc.) are excluded.

**EnviroPump and Seal, Inc. reserves the right to modify the warranty without notice.

V.I.T.™  is a registered trademark of EnviroPump and Seal, Inc.

 Kalrez™ is a registered trademark of DuPont.  Chemraz™ is a registered trademark of Green, Tweed.

 

©2009 EnviroPump and Seal, Inc.